Tasmanian Gravel

'A' Base

A crushed 19mm (3/4 inch) minus aggregate consisting of gravel, sand and specific amounts of clay. It is used for roads, foundation bases, driveways and parking lots. ‘A’ Base is usually a finishing material that packs very well. Order extra, will lose 20 %.


'C' Base

A crushed 37mm (1&1/2 inch) minus aggregate consisting of gravel, sand and specific amounts of clay. ‘C’ Base would be used in similar applications to ‘A’ Base and placed prior to the ‘A’ Base if the grade needs to be raised significantly. ‘C’ Base also packs very well.


Tasmanian Gravel

Pit Run Gravel

The name basically describes this aggregate. It is the raw gravel that is dug out of the bank of a gravel deposit. Tasmanian Gravel Ltd. is fortunate to be able to offer approximately 75mm (3”) minus Pit Run. This means, on average, the stones are 75mm (3” and down) to sand with some clay in the mix as well. Pit Run Gravel is one of the least expensive aggregate products and thus is used to build up grades that are significantly low (prior to ‘A’ or ‘C’ Base) and filling holes.


Tasmanian Gravel

Traffic Gravel

A 19mm (3/4 inch) crushed stone or screened aggregate with no additional clay added. Used for driveways, parking areas and walking paths. With no additional clay, the surface does not get as muddy as ‘A’ or ‘C’ Base when wet.


Tasmanian Gravel

Black Dirt/Topsoil

Our topsoil is processed through a screen with a 25mm (1 inch) opening thus removing rocks, sticks and dirt lumps. The soil is a sandy loam which all our customers find easy to work with. Custom blends of topsoil, manure and peat moss are available for commercial job specific applications.


Tasmanian Gravel

Stucco Sand

This washed sand is a favorite among the stucco trade near and far. A ‘sharp’, well graded, clean and processed sand that is neutral in color offering accurate tinting capabilities.


Bedding Sand

A screened sand that is passing (smaller than) a 12mm (1/2 inch) square opening. Bedding sand is most commonly found around fiberglass and concrete tanks, underground plumbing pipes and electrical cables.


Tasmanian Gravel

Golf Course Top Dressing Sand

Conforms to USGA specifications and can be used for top dressing as well as green construction and repair. This washed sand is a favorite in sand traps as well.


Tasmanian Gravel

Golf Course Blend (80/20 blend with peat moss)

This blend is a metered mixture of our Washed Golf Course Sand and screened peat moss to achieve the ideal percolation rate. This dual component material can be used in green construction, repair and top dressing.


Tasmanian Gravel

Sandbox Sand (washed)

If you want the kids to have hours of fun in the sandbox and stay clean then this is the sand for you! Almost 100% of the clay has been washed out leaving a free flowing ‘beach type’ sand ( it’s the clay in most sands that leaves the deep ‘brown’ color on clothes and hands ).


Tasmanian Gravel

Washed Sand

This aggregate has been washed through a 1/4 inch (6mm) screen and then had any clay and silt removed in the final processing stages. This material is the answer when a very free flowing, non-packing sand is desired .


Tasmanian Gravel

Pea Stone

A screened, washed and mostly round aggregate ranging in size from 4mm (1/4 inch) to 10mm (5/8 inch). There is no sand, fines or clay in Pea Stone. Applications include fuel tank beds, landscaping features, playground structures and dog kennels.


Tasmanian Gravel

Buckshot Stone

Another screened and washed product consisting of rounded stones ranging in size from 2mm (1/8 inch) to 4mm (1/4 inch). Buckshot is a free flowing clean stone aggregate that is commonly used around well cribbing’s and fiberglass tanks for protection. This material also has playground applications as well.


Tasmanian Gravel

Crusher Chips

This crushed aggregate is produced when breaking down larger rocks. Sizes range from 3mm (1/6 inch) to 8mm (1/3 inch). This material packs well.


Tasmanian Gravel

3/4 inch (19 mm) Crushed Stone

A clean 100% stone with no sand or fines. Sharp edges and multiple colors make it ideal for landscaping around trees and yard features. A quality aggregate for driveways as well that will limit dirt tracked into homes or garages.


Tasmanian Gravel

1 1/2 inch (38 mm) 100% Crushed Landscaping Rock

This rock would resemble one that would commonly be found along railroad tracks. It consists of all broken rock at a uniform size. It is commonly used in landscape features where a more ‘rugged look’ is desired. The colors of this stone consist of white, blue, pink and dark colored tones.


Tasmanian Gravel

1/2 inch – 1 inch (12-25 mm) Round Washed Stone (radon rock)

An alternative to the 3/4 inch Crushed Stone depending on the look one is expecting to achieve. Uses include decorative areas around trees and shrubs as well as walking paths. Being larger than Pea Stone, it is a material suitable where ‘coarser’ drainage rock is desired.


Tasmanian Gravel

1 inch – 2 1/2 inch Septic Stone

Used for septic field installation and drainage.


Tasmanian Gravel

1 inch - 4 inch Screened Stone

Used for drainage, landscaping, filling in soft spots in driveways and parking areas.

Tasmanian Gravel

Tasmanian Gravel Ltd. We're wild for your business


Like us on Facebook